^ Back to Table of Contents

GARDNER-DENVER 2500 TRAILER-MTD RIG

1965 GARDNER-DENVER 2500 Trailer-Mounted Drilling Rig p/b DETROIT V-6 Diesel Engine (Overhauled by STEWART & STEVENSON- 0 Hours), 7/8" Drill Line (New), GARDNER-DENVER FXFXK 7-1/4" x 14" Mud Pump w/MATTCO Fluid End p/b DETROIT V-8 Diesel Engine (New - 0 Hours), 23-1/2" Rotary Table, 40'L Kelly, Kelly Hose (New), 3600' of 3-1/2" Drill Pipe (Recently Scoped, 20 Jts New, DWB), (6) 6"OD Drill Collars (Recently Scoped), (2) 30'L Pipe Racks (New), 30'L Float w/Doghouse & Fuel Tank, Various Sizes New Drill Bits (Drawworks Transmission Completely Overhauled by STEWART & STEVENSON - 0 Hours, Both Floats Have Had Air Lines Replaced, New Brakes)   Download Brochure (PDF 278KB)

For More Information Please Call 210-375-8470

^ Back to Table of Contents

GARDNER-DENVER SD55 DRILLING RIG

(Depth Range 3500' w/4-1/2" Drill Pipe) 1980 GARDNER-DENVER SD55 D/D Drilling Rig (Drwwks Rebuilt in 2004 w/Air Clutches & Dbl Band Brake Bands) p/b CUMMINS N-14 Diesel Eng, 8LL Trans, 56'H 135,000# Mast w/Racking Board, Mtd on CRANE CARRIER 4-Axle Carrier, (2) GARDNER-DENVER FXO 6" x 10" Duplex Mud Pumps p/b Rig, 4" Cent Charge Pump p/b ISUZU Diesel, PARMAC Hydro Brake, PERKINS Gen, FOSTER Catheads, McKISSICK 100-Ton Block/Hook Combo, GARDNER- DENVER 100-Ton Swivel, HOWARD TURNER 18" Rotary Table, Wt Indicator, (2) 100-Gal Fuel Tanks, 4-1/2" x 30'L Round Fluted Kelly, 5-1/4" x 40'L Hex Kelly, (2) 3-Sheave Traveling Blocks, BJ Tongs, Slips & Elevators f/4-1/2" Drill Pipe, Bit Subs, 7" Diverter, Suction Hose, 5-1/2" & 7" Casing Tools, 2700' of 4-1/2" Drill Pipe, (300) 6"OD Drill Collars, Hyd Casing Spinners, Rig Lights, Misc Tools, Hoses, Fittings, Subs, Etc, AUTOCAR 100-Bbl Vacuum Truck, FREIGHTLINER Doghouse Tooled Out w/GEOLOGRAPH 2-Pen Recorder, Cutting Torch & Welder, INTERNATIONAL Pipe Truck, 1996 CASE 580SL 4x4 Extendahoe Backhoe & Collar Trailer Download Brochure (PDF 299KB)

For More Information Please Call 210-375-8470

^ Back to Table of Contents

UNISON DRILLING, INC.

RIG NO. 4 (Last Drilled January 2008) SPENCER HARRIS 3500 Trailer-Mtd Drilling Rig, BAKER N-4 Drwwks p/b CAT 3406 TA (Rebuilt in 2007), TWIN DISC Torque, FOSTER Hyd Makeup & Breakout Catheads, Belt-Driven Hyd Pump, QUINCY 375 Air Compressor, SPENCER HARRIS 96'H 150,000# 4-Leg Mast, Hyd Raised & Cable Scoped w/(5) Sheaves f/1" Drill Line, Racking Board & 4" Standpipe, 7'H x 14'W Sub w/V-Door & Stairs, 12"H x 12'W x 37'L Mud Boat (2) NATIONAL K-380 Duplex Pumps, Ea Belt-Driven by CAT D-353 Diesel Eng; Earth Pit System w/(2) 12" Desanders, 5" x 6" Cent Pump p/b CAT 3304T (Rebuilt), Mud Mixing Hopper, All Mtd on 8'W x 12'L Master Skid; SKYTOP BREWSTER 18" x 44" Rotary Table w/Split Master Bushing; IDECO TL120 Swivel w/4-1/4" Sq Kelly, Sq Drive Bushings; McKISSICK 75-Ton Block, Unitized w/BJ 75-Ton Hydra Hook CAT 210 KW 220 Volt 3-Ph Gen Set p/b CAT 3306T; CAT 100 KW 220 Volt 3-Ph Gen Set p/b CAT 3304T; QUINCY 375 Air Compressor p/b 25 HP Elec Motor; All Mtd in 8'W x 13'L Utility House, Elec Control Panel w/Wiring, Lights, Mtd on 1981 HOBBS 40'L Trailer, 2000-Gal Fuel Tank (Tank NEW 2006) 7’8"W x 46'L 300-Bbl Open Top Water Tank w/Doghouse; REGAN 8" 3000# Annular BOP; MATHEY Hyd Wireline Unit w/15 HP Elec Motor, 4-Station Closing Unit on Skid w/8'W x 30'L Junk Box; All Handling Tools & Tongs; G-D 4X Swivel (Rebuilt); (2) Spare McKISSICK Blocks, (1) 3-Sh w/WEB WILSON 40-Ton Hydra Hook, (1) 4-Sh w/WEB WILSON 65-Ton Hydra Hook (Rebuilt); Misc Pump Expendables (NEW); 4650' (150 Jts) 4", 14.40#, Grade E, Rng 2 Drill Pipe w/4"FH Tool Jts (YB); (12) 6"OD Drill Collars  Download Brochure (PDF 180KB)

For More Information Please Call Annie or Michael Mello @ 830-663-4700 FAX:: 830-663-4725 or Rick Russell @ 940--841--3428!!

^ Back to Table of Contents

HAMMER BITS

3-1/2” Cop-32 F 1/2 Dome 1/2 Ballistic (New) 4” Cop-32 F 1/2 Ballistic (New) 4-1/4” DHD-340A C 1/2 Gate 3/8 Rest (New) 7-7/8” DHD-380 C 5/8 Dome 9-5/8” DHD-380 R 3/4 All The Way (New) 9-7/8” DHD-380 C 34 Gage 5/8 Rest Dome (New) 8” Mach 60 C 5/8 Dome (New) 8-1/4” Mach 80 CV 5/8 Dome (6) 4-1/2” SD-4 C 5/8 Gage 1/2 Rest (New) 4-1/2” SD-4 C 5/8 Gage 1/2 Rest (5) 5-1/2” SD-5 C 5/8 Gage 1/2 Rest 5-1/2” SD-5 DC 5/8 Gage 1/2 Rest 5-1/2” SD-5 CV 5/8 Gage 1/2 Rest 5-1/2” SD-5 F 5/8 Dome (New) 5-1/2” SD-5 DC 5/8 Dome (12) 5-1/4” SD-5 C 5/8 Gage 1/2 Rest (New) (3) 5-3/4” SD-5 C 5/8 Gage 1/2 Rest Bal (New) (46) 5-3/4” SD-5 C 5/8 Dome (New) (4) 6-1/4” SD-5 C 5/8 Dome (New) (2) 6-1/2” SD-6 C 5/8 Dome (New) (5) 6-1/2” SD-6 CV 5/8 Dome (New) (5) 6-1/2” SD-6 CV 5/8 Gage 5/8 Ballistic (New) (6) 6-1/2” SD-6 C 5/8 Dome (New) 6-1/2” SD-6 CV 5/8 Dome 5/8 Ballistic (New) 6-1/2” SD-6 CV 5/8 Dome (New) (2) 6-1/2” SD-6 C 5/8 Dome (New) (3) 6-1/4” SD-6 CV 5/8 Dome (New) (34) 6-3/4” SD-6 C 5/8 Dome w/Wearpads (New) (5) 6-3/4” SD-6 C 5/8 Dome (New) (11) 6-3/4” SD-6 CV 5/8 Dome (New) 7” SD-6 C 5/8 Dome (New) (5) 8” SD-6 CV 5/8 Dome (New) 8-1/2” SD-8 DC 5/8 Dome 8-3/4” SD-8 R 3/4 All The Way (New) 8-1/2” SD-8 F 5/8 Dome (New) 6-1/2” SF-6 F 3/4 Gage 5/8 Rest Dome (New) 7-1/4” SF-6 C 5/8 Dome (New) 7” SF-6 C 5/8 Dome (New) Download Brochure (PDF 180KB)

For More Information Contact Rick Russell @ 940-841-3428 or Donna Haggard @ 918-809-8182!!

^ Back to Table of Contents

VACUUM TRAILER

1993 ACRO 7500 US Gallon Tandem Axle Stainless Steel Transport Trailer, 53,800# Product, 10-Gauge Head Material, 10-Gauge Shell, 25 PSIG Asking $67,500

For More Information Contact Rick Russell @ 940-841-3428!!

^ Back to Table of Contents

CENTRIFUGE

16.25” x 55” Bowl Inside Dimensions, 5” Single Left Hand Lead, Tungsten Carbide Tiles Throughout, VFD w/Back Drive, 60 HP Motor, 30 HP Back Drive Motor, 304 Stainless Steel on all Wet Components, 304 Stainless Steel Case, 52:1 2-Stage Planetary Gearbox.

For More Information Contact Larry Rogers @ 214-755-2773!!

^ Back to Table of Contents 

 

To list your equipment, call 1-918-499-8900 or email us at support@premierauctioneers.com and a Premier Representative will contact you to discuss your needs.